admin No Comments

Custom Size Foundation Concrete Blocks For Fencing, Posts, And Sign Boards

At Dana Steel UAE, A Concrete Block is a ‘Building Block’ manufactures entirely by concrete under the fencing division. It is then bonded together with mortar to form an imposing long-lasting structure. These building blocks may be ‘Hollow’ or ‘Solid’ constructed either of ordinary or lightweight concrete in various standardized sizes, depending on specific requirements.

These blocks are sometimes applied as a steel unit for walls, posts, fences, sign boards, partition or walls of panels. These are used in places in which bricks and stones of sufficient quality and strength are not commonly available for stemming but which are very easily accessible.

Concrete Block

Types of Concrete Blocks

These concrete type blocks are also categorized as:

  1. Solid Concrete Blocks

Most often than solids, Hollow concrete blocks are used because:

• Minimize weight overall and are also easier to carry.

• It can be addressed and improved, but also easily fulfils challenging structural needs.

  1. Hollow Concrete Blocks

Owing to its extra weight, solid concrete blocks are exceptional in their everyday use. They call for special criteria, needs and requirements, such as higher fire resistance, when sound absorption is a criterion, or when it is necessary to be impenetrable.

Concrete Blocks

Concrete Block Advantages

-Cost-effective relative to other construction material types.

-Lightweight, which is very useful in a job where heavy manual labor is necessary.

-May also be used to support the cost of power bills as a heat- or cold insulation type.

-This is a lasting concrete block, since it is resistant to termites and temperature, as opposed to wood.

-Versatile: Can be used from backyards, partition walls or even soundproof rooms in a variety of different ways.

Dimensions

The measurements are the length, width and height of blocks. The nominal dimensions of concrete blocks are referred to. The term “nominal” refers to measurements which include mortar joint thickening.

The Standard sizes are 600 mm L x 400 mm W x 200 mm H and 500mm L x 400 mm W x 200 mm H. But Dana Steel UAE also undertake special sizes of blocks up to 1000 mm (i.e. 1 meter) L x 1000mm (i.e. 1 meter) W x 1000mm (i.e. 1 meter) H.

Others appear to vary greatly because of the contractual arrangement between the buyer and the supplier other than the above described size of the Concrete Block.

Concrete Foundation Blocks

Various Uses of Concrete Blocks

Fences for Security

If you want an easy but efficient means of protecting the location, concrete blocks are great barriers to protection. All of them can be works without requiring to hire guards for various form of special events and buildings.

Walls

The concrete block is the ideal material for the construction of walls of retention. It will remove some elements, such as water or unwanted landscape, from areas of your house. In general, its light weight and extremely durable makes it particularly good for the retention of the walls. This combination gives construction workers a much easier job while maintaining a high-quality structure.

Signboards and Posts

The concrete block is a very flexible product, as we have already mentioned. There are countless chances to do what you can do with the signs or posts. This building material provides a great vehicle to accomplish such projects, whether you want a safety board, promotion or advertisement board.

admin No Comments

How Would You Get Benefit From The Best Marketing Construction Signage?

The best way to advertise your company on-site can be a construction signage. You may use it to take an audience recruiting and selecting of construction services.

But you need to build the signboard to have the end result before you can start working for you. We will cover from the beginning to the end what you need to know about the plan.

What is a Signboard for Construction Site?

These products you might also know as the signs for the workplace.

Dana Signage

In general, wherever you are going to work, or where your services are needed, you can use them. You can put them on your workplace, on the sidewalk or at the border like a barrier.

Most signage companies can manufacture the signs from durable materials, such as wood, on which graphics or pattern of your choice are printed.

1

This strong and durable structure allows you to switch around and use it on different sites repeatedly.

Consider this item for a long-term investment. For example, all types of companies will benefit from these signs includes:

  • Construction
  • Electrical
  • Painting
  • Interior decorator
  • Home remodeling
  • Roofing
  • Plumbing
  • Landscaping
  • Painting

3

Public spaces are typically of high traffic. Every day hundreds, maybe even thousands of people travel by and around. This advertising space would be a waste, not to profit from it.

Benefits of Construction Signage

But how do you make your company public?

It will first help you obtain recommendations from those who work on the site or any user or customer who visits the site. The best thing is that they undoubtedly will be people who have an experience in building industry contractors.

Secondly, the passers-by will catch their eyes. Any time you see a new construction site, people are generally intrigued. So it’s not going to be difficult to catch their eye. You can broaden the perceptions further than your own industry with a branded sign and gain wider exposure.

Therefore, a construction sign may be used to cover many bases in one go. But it can have a certain other consequences as well as all of this. A well-mounted construction signage has found several companies that can help you cover the nasty features on a working site. It can help in general to explain what can be a relatively unattractive atmosphere instead.

4

The sign can also be called a board of information. It’s an extremely minor effort to communicate with whom the platform is, how long it takes, and so on.

More importantly, the safety requirements set by relevant authorities such as OSHA and ANSI must be complied with all construction sites.

One smart use of the signage is to complement other specialized signs by offering a few simple safety details. You may use it, for example, to remind everyone of this building and caution. Every little bit can help when it comes to protection.

Marketing Part

The design of unique signage like a signboard can be a great step to your business growth. You can create new clients, build leadership, and inspire people to try out your services with some clever design tricks and marketing secrets. But you must understand that it’s a step when you plan to launch a marketing campaign. It is not just a question of ordering one signage to promote any company. You should instead include the signs in a much broader marketing campaign.

DANA Steel based in UAE (Division of Dana Groups) is the greatest maker and stockiest of Fence, Steel Coils, and Signage in Dubai, Ajman, Sharjah, Abu Dhabi, Uae. We supply in the whole Middle East covering the U.A.E and GCC area. We supply Chain Link Mesh Fencing to UAE (Dubai, Ajman, Sharjah, Abu Dhabi, Rak, UAQ, and Al Ain), Oman (Salah, Muscat, Ibri, Sohar), Saudi Arabia, Kuwait, Bahrain, and other Middle East areas

admin No Comments

STUDS / TRACKS / FURRING CHANNELS / METAL PROFILES Supplier for DRYWALL PARTITIONING

The drywall partitioning system from Dana is a system of metal partition composed of ceiling, studs, and tracks. The partitions of Dana Stud & Track are light, unloaded and responsive on site. The measures are cost-effective for any form of commercial, leisure, industrial, and residential development.

By combining, they form a frame that is designed to accommodate single and double-density gypsum wallboards. Dana Stud and Track is available in different widths when fitted with a gypsum board. It has a high wall. Studs can also be joined together from a box when an even more power for the complete drywall partition is needed.

The unit weight of Dana Stud and Track is much less than the conventional unit of comparable thickness to effectively save structural architecture. The section also allows for service inclusion while building. Our partitioning Stud & Track is completely compliant with our furring section ceiling. Studs have a knurled face that helps the wallboard to penetrate with straight screws when connected to drywalls and this allows the builder to finish the drywalls with less effort and time. In domestic and commercial structures from Dana Steel factory, the metal partitioning systems Stud and Track can be used as solid walls.

DRYWALL PARTITIONING - Metal Stud Track

Metal Stud Track

 

Our manufacturing process guarantees the consistency and strength of all Stud and Track parts and accessories. Both tracks have been tested or checked for BS 476 or E-119 fire resistance standards.

Drywall Partitioning – Top and Floor Track fixation

The raw of fixings, with a max center of 600mm must be securely fitted to the ceiling & floor track. If the concrete or screened floor is newly fitted, the installation of the damp proof layer between the surface of the floor and the track portion should be considered. If the wall is wide and it needs to be wider than 3600mm, two studs can be entangled to create a box section.

Stud 2 Board layers max. 50 mm and 4200mm in height

Stud 2 Board layers max. 70mm and 4800mm in height

Similarly, a box of two studs will have a wall height of 7200mm when accessing.

Stud 2 146mm Board layers up to 10500 mm in height.

DRYWALL PARTITIONING

Studs GI Metal Framing Track Partition Supplier UAE

 

It is necessary, when studs are sealed, that only one stud thickness is inside the floor and the ceiling. Studs should be cut to match the floor track and end on the roof track while the other one fits into the roof track and ends on the top of the ground track.

With the wall cavity up to a full diameter of 25 mm, electric lines and pipes can be conveniently accommodated. Additional support may be appropriate for heavy installations such as bathrooms and sanitary fittings.

Doors Openings for Drywall Partitioning

The designers should take into account the thickness tolerance of the form of partitions with respect to the proposed Door Frame Specification. The head consists of a segment of track on either side that is fastened to studs. Where additional supply for heavy door settings is needed, the studs can be sled with the necessary track section of the gauge.

About Us

DANA Steel based in UAE (Division of Dana Groups) is the greatest maker and stockiest of Studs, Track, Furring, Structurals, Fence, Deck, Steel Coils, and Sheets supplies in the whole Middle East covering the U.A.E and GCC area. We supply Chain Link Mesh Fencing to UAE (Dubai, Ajman, Sharjah, Abu Dhabi, Rak, UAQ, and Al Ain), Oman (Salah, Muscat, Ibri, Sohar), Saudi Arabia, Kuwait, Bahrain, and other Middle East areas.